Monitor Evasser Bin Aerator

Monitor Evasser Bin Aerator
Product Description
Review and Rating
Monitor Evasser Bin Aerator

The Evasser bin aerator from Monitor Technologies is a device used to promote the flow of dry bulk powders from a storage vessel without the noise and damaging vibration caused by pneumatic or electric vibrators. The Evasser aerator is small, compact and capable of aerating many types of bulk powders and granular solids in bins, hoppers and silos. The Evasser can discharge air up to 80 psi (5.5 bar) to move settled materials. Once material is flowing the Evasser can be used to maintain flowability of material with a constant 2 to 5 psi (0.14 to 0.35 bar) supply of air. 
Unlike other types of aerators that use cotton or canvas to diffuse the air, the Evasser is less likely to be bound or clogged due to moisture and can be more effective as it directs air flow to 'sweep' the bin wall. In addition, the Evasser is not as prone to back-flow of material as the standard neoprene boot expands to let the pressurized air out and contracts when the air is shut off blocking the air outlets from material backflow. 
The Evasser bin aerator is available with a convenient external mounting plate. This means that installation of the device can be done from outside of the bin making it ideal for use in replacing worn and plugged air pads. In addition, with no moving parts or filters to clean or replace the Evasser requires virtually no maintenance.

The single Evasser bin aerator operates by continuously introducing air into a mass of stored powder. When first conveyed into a storage vessel, the powder is a highly aerated mixture of air and particulate. In this state, the mixture flows quite easily. As the material settles, the particulate and air separate. The material decreases in volume and increases in density (it packs), and in turn it begins to behave like one solid mass rather than a fluid mixture of particles. The Evasser replaces the naturally lost air and increases and maintains the air-to-particulate mixture ratio, thus allowing the material to flow.


- External Mounting Available 
- No Damaging Vibration


The most effective aeration of dry bulk materials is typically achieved by the use of four rows of Evassers, one row located in each quadrant of the slopping bin bottom. With aerating dry powders the Evassers will normally be spaced 18in on centers, with the lowermost units located close to the outlet where most of the bridging starts. On granular materials the location of the Evassers will vary with the material being aerated and the configuration of the bin. In all cases, please consult with the Monitor application engineers that are ready to provide you with the best recommendation for your specific material flow problem.

Typical Applications include, but are not limited to:

Cement Bentonite Gypsum  
Soda Ash  Lime  Flour
Carbon Black  Fly Ash  Other