Specialist Suppliers of 
Industrial Controls

Diverter Port Ball Valves

Diverter Port Ball Valves
Product Description
Review and Rating
Resources
Diverter Port Ball Valves

PBM Diverter Port Ball Valve

The PBM Diverter Port valve is a 3-Way valve with the common port at the side or the bottom of the valve. This valve has seats for positive shut-off on two ports, and a third, or common, port which has no seat and is always open to flow. The PBM Diverter Port valve is an economical choice for many piping designs. In some applications, a single Diverter Port can replace two or three 2-Way valves to reduce cost and space. In other applications, a Diverter Port valve can produce an economical alternative to a 3-Way multi-port valve, depending on the sealing requirements. This valve is also an excellent choice for mounting two relief valves from a common pressure source.
PBM Series 5 Diverter Port valves are readily available in sizes 1/2" - 6" in 316 stainless steel, with other materials upon request. A wide choice of end fittings are available.

Industrial Valves
PBM's Diverter Port Industrial ball valves are designed for general purpose, non-sanitary process applications, or for connection to piping fittings rather than tubing fittings.

Sanitary Valves
PBM's Diverter Port Igenix™ Sanitary ball valves are designed for pure process applications, or for connection to tubing fittings.  These valves are ideal for pharmaceutical, biotechnological, and microelectronic applications. Valves are assembled lubricant-free with Virgin Polytetrafluoroethylene (VTFE) soft parts and either 316 or 316L wetted metal parts.

Features:
• Adjust-O-Seal® design allows the valve seat seal to be restored in-line to a leak-tight condition, to compensate for normal seat wear.
• Swing out/Lift out Design for easy removal and installation.
• Internal seat design produces a bubble-tight seal.
• Spring-loaded washers create a live-loaded stem assembly for positive sealing.
• True-Bore® (port matches ball, seat and end fitting I.D. to tubing I.D. to eliminate puddling) and Full Port.
• Stem assembly accommodates PBM Direct Mount Actuation for accurate alignment and increased cycling life. Engagement between the stem and ball is indexed and is well-suited for high torque applications.
• Encapsulated body gaskets eliminate cold flow and reduce recesses where media could accumulate and contaminate the process.
• Quickly and easily convert valves with common ports from Industrial to Sanitary (and vice versa) using interchangeable seats.
• Transflow, the gradual media flow that occurs as one port opens and another closes, prevents dead-heading and damage to pumps. Most flow patterns support transflow.
• Optional mechanical or electropolished I.D. and O.D. surfaces minimize crevices and enhance sterility in DI Igenix Sanitary valves.
• Extended Butt-Weld for Tube and Extended Butt Weld for Pipe end fittings may be welded in-line without disassembly.
• Optional body cavity fillers minimize areas where media could become trapped and contaminate the process.
• Strong handle and stem. Vinyl end covers are designed for a sure grip.
• Position indication plate is provided.
• Precision machined and polished ball reduces torque and extends seat life.