Komax Scepter Heater

This versatile series of heaters is designed for the direct injection of steam into tanks for heating water compatible products in a quiet, vibration free, and 100% efficient fashion. In addition they develop a strong stirring action to help keep any solids or particulates in suspension. This stirring action also helps to produce uniform temperature throughout the tank volume allowing accurate thermostatic control.

Constructed of type 316 stainless steel the standard Scepter™ heaters are available in one inch through ten-inch pipe sizes and may be mounted in a tank from above, below or with a side port configuration. They are available with threaded pipe connections for the steam from one inch through three-inch pipe sizes.
 
15 lb. RFSO flanged connections available on all sizes. Each unit employs a special Komax® module via a pipe having a diameter about 2/3 of the Equalizer® outside diameter. When inserted into a tank of liquid the latter enters the module around the periphery of the steam inlet pipe by the momentum of the entering steam. Water and steam are divided and mixed by the mixing elements in each of the module holes and exit as a set of co-rotating vortexes. These form multiple impingement mixing zones at the exit of the mixing module to produce complete contacting of steam and the product to be heated in a low noise and low vibration fashion. No auxiliary air supply is required for quiet operation.