EVR Series 2000 Pinch Valve

Features
• Completely enclosed ductile iron body
• Streamlined centerline closure
• Tight shut-off even on trapped solids
• Positive opening tabs standard on all sleeves
• Non-rising hand wheel with position indicator
• Face-to-face values equal to industry standards

The Series 2000 Pinch Valve is a completely enclosed, manually operated valve. It's reliable, maintenance-free design is perfectly suited for tough slurries, abrasives, and corrosive chemical applications.
The heart of the Series 2000 Pinch Valve is a long-lasting, flexible rubber sleeve, available in a wide variety of elastomers suitable for any application. With its excellent control characteristics, the Series 2000 can be used as a manual throttling control valve. Reduced port, funnel port or double wall sleeves are available for these applications.

Typical Applications
Waste and Water Treatment - Mine Slurries - Chemicals - Mine Slurries - Cement - Pulp and Paper

Construction
The body of the Series 2000 Valve is usually constructed of ductile iron, but lightweight aluminum and corrosion resistant stainless steel are also available.
 

Options
Flange Drilling - ANSI, Metric, or custom drilling classes available.

Chainwheel Controls - For valves that are mounted out of reach.

Bevel Gear - Suggested for high pressure applications or for valves where diameter is at least 6" and pressure is 75 psi or above.

Stem Extensions - Available for hard to reach or buried service valves.
 
Available Elastomers
Ethylene Propylene Rubber(EPDM) - Viton™(FKM) - Buna N(NBR) - Natural Rubber(NR) - Hypalon™(CSM) - Butyl(CIIR) - Neoprene(CR) - Teflon™(AFMU)