EVR Series 1100 Pinch Valve

Features
• Centerline closure for streamline flow
• Tight shut-off even on trapped solids
• Built-in over-pinch protection
• Positive opening tabs standard on all sleeves
• Valve position easily visible
• Face-to-face values equal to industry standards

The Series 1100 Pinch Valve features a simple, proven and cost-effective design. Virtually maintenance-free, the sleeve is the valve's only wetted part, eliminating possible contamination of the process materials.
The 1100 Series Valve has no seats that require grinding, no packing glands or stuffing boxes which require repacking. Both torques and flow rates remain constant during valve operation. The valve will not become locked or jammed even when dealing with solids in the flow.

Typical Applications
Mining - Waste and Water Treatment - Food Processing - Mineral Processing

Construction
The body of the 1100 Series valve is available in either carbon steel, aluminum or stainless steel and features an open-frame design.
 

Options
Flange Drilling - ANSI, Metric, or custom drilling classes available.

Chainwheel Controls - For valves that are mounted out of reach.

Bevel Gear - Suggested for high pressure applications or for valves where diameter is at least 6" and pressure is 75 psi or above.

Stem Extensions - Available for hard to reach or buried service valves.

Available Elastomers
Ethylene Propylene Rubber(EPDM) - Viton™(FKM) - Buna N(NBR) - Natural Rubber(NR) - Hypalon™(CSM) - Butyl(CIIR) - Neoprene(CR) - Teflon™(AFMU)